In general, if you desire to pour concrete in your Miami backyard, you will need a permit. To ensure that your project complies with local building rules, the city usually needs approval, whether it’s for a concrete slab, a sidewalk, or a tiny patio. To prevent any problems, it’s a good idea to get in touch with Miami’s building department before you start.

A tiny, low-to-the-ground deck that is less than 200 square feet and less than 30 inches high can typically be constructed in Miami without a permit.

Before starting any work, it is crucial to check with the local authorities as the restrictions may differ depending on your neighbourhood or property.

When you take in a deck contractor for an estimate they consider several different variables that can impact the price of a project dramatically. One such factor would be the size of your deck or what type of material is needed for the decking.

These are the factors that could impact the cost of a deck in Miami size, materials, and design complexity. You should budget between $20 and $60 per square foot on average.

In Miami’s hot and humid climate, the best decking materials are those that can handle moisture, sun, and pests. Many homeowners opt for composite decking because it’s low-maintenance, durable, and resists fading and mold. Pressure-treated wood and tropical hardwoods like ipe are also popular for their strength and natural beauty, but they do require more upkeep.

A wood deck in Miami will typically survive 10 to 15 years, plus or minus, depending on the type of wood and how well it’s taken care of. You can squeeze out a few extra years with conscientious sealing, cleaning, and repair. Keep in mind, though, that the heat and humidity of Miami can hasten deterioration if the deck is not properly protected.

The majority of fence installations within Miami do require a permit. The City of Miami or Miami-Dade County will review your plans to ensure your fence meets height, location, and material regulations. It’s always a good idea to call your local building department prior to starting any fencing project.

Miami has updated several zoning and safety codes over the past few years. Where fences are concerned, some of the more notable updates have included height limitations (generally maxing out at 6 feet for residential parcels of land), visibility requirements along driveways and intersections, and material requirements for hurricane resistance. Always consult the latest city or county codes, as they can vary depending on your neighborhood.

The installation of fences in Miami varies based on material, labor, and property size. On average, you can expect to pay $20 to $50 per linear foot. A basic wood or chain-link fence will be at the lower end, but vinyl or aluminum decorative or privacy fences are more expensive.

Composite fencing in Miami ranges from $35 to $60 per linear foot, installed. While more expensive upfront than wood, composite fences last longer, require less upkeep, and hold up well to the city’s tropical climate.

The best fence material in Miami depends on your needs, be they privacy, security, aesthetics, or a mix of all three. Vinyl and composite score high for durability and low upkeep. Aluminum is the option for that modern, sleek look without the concern of rust. For that natural appearance, pressure-treated wood or tropical hardwoods are still well-liked but require ongoing maintenance.

Miami building codes dictate that any porch, deck, or stairway that is over 30 inches above the ground needs to have railings. The railing must be at least 36 inches high for a home (and 42 inches for commercial), and the balusters must be such that a 4-inch sphere can’t pass through. All of these codes are for safety and must be followed in order to pass inspection.

The cost to install railings in Miami ranges widely depending on the material, wood, metal, glass, or composite, and the complexity of the design. On average, you’re looking at $60 to $200 per linear foot. Simpler wooden or metal railings are more affordable, while custom glass or stainless-steel systems are on the higher end.